Finished Product Testing

22 Şubat 2017 - Çarşamba

FINISHED PRODUCT TESTING

CERAMIC TILES

TS EN ISO 10545-1 Sampling and basis for acceptance
TS EN ISO 10545-2 Determination of dimensions and surface quality
TS EN ISO 10545-3 Determination of water absorption, apparent porosity, apparent relative density and bulk density
TS EN ISO 10545-4 Determination of modulus of rupture and breaking strength
TS EN ISO 10545-5 Determination of impact resistance by measurement of coefficient of restitution
TS EN ISO 10545-6 Determination of resistance to deep abrasion for unglazed tiles
TS EN ISO 10545-7 Determination of resistance to surface abrasion for glazed tiles
TS EN ISO 10545-8 Determination of linear thermal expantion
TS EN ISO 10545-9 Determination of resistance to thermal shock
TS EN ISO 10545-10 Determination of moisture expantion
TS EN ISO 10545-11 Determination of crazing resistance for glazed tiles
TS EN ISO 10545-12 Determination of frost resistance
TS EN ISO 10545-13 Determination of chemical resistance
TS EN ISO 10545-14 Determination of resistance to stains
TS EN ISO 10545-16 Determination of small colour differences
DIN 51130 Testing of floor coverings - Determination of the anti-slip property – Ramp test
TSE CEN/TS 16165 Determination of slip resistance of pedestrian surfaces – Methods of Evaluation – Annex B
BS 7976-2:2002 + A1 2013 Pendulum Testers Part:2 Method of Operation
TS EN 13036-4 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test (Laboratory Testing)
ANSI / NFSI B101-2012 Test Method for Measuring Wet DCOF of Common Hard- Surface Floor Materials
ANSI A.137.1-2012 Wet Dynamic Coefficient of Friction (DCOF) Testing

SANITARY APPLIANCES 

NF D 14-501 Resistance To Abrasion Of Enamelled Surfaces

REFRACTORY PRODUCTS 

ASTM C 830 Standard Test Methods for apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM C 357 Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM C 133 Standard Test Methods for Cold Crushing Strength of Refractories


Sosyal Medyada Paylaş