CERAMIC RESEARCH CENTRE INC.: 


BET Surface Area Measurement
================================================================================
admin on 08/06/2010 15:54:00
 
BET device is used in surface area measurements of powder or batch samples and
pore size and pore size distribution The device determines needed gas

Color Measurement with Spectrophotometer (L-a-b)
================================================================================
admin on 09/06/2010 12:03:00
 
In ceramic industry, to supply continuity of designs, colour differences are
important amongst other parameters, and they should be under control in quality
control process.

Mercury Porosimetry (pore quantity and pore size)
================================================================================
admin on 08/06/2010 16:34:00
 
Mercury porosimetry is used in determination of pore size, pore size
distribution, surface area measurements and mass density of powders or bulk
samples. Based on

Particle Size Distribution Analysis (using Laser Technique)
================================================================================
admin on 09/06/2010 13:05:00
 
Laser diffraction method is used to measure particle size between 0.2-2000 pm of
slurry and glaze. The measurement gives values of d1O, d50, d90, size

Particle Size Distribution Determination Using X-ray Sedigraphy Method
================================================================================
admin on 09/06/2010 12:05:00
 
This technique is especially suitable for accurate particle size measurement of
layered structural materials like clay and kaolin. Using a horizontal and thin
x-ray gun,